Loft Room Insulation For Sloping Ceilings: Walls, Boards & Foil

A ladder standing in a minimalist room with white walls and sloping ceilings, symbolizing work on loft room insulation or improvements to sloping ceiling spaces.

Share

X
Facebook
LinkedIn
Email

Many homes today have a bedroom or study in the loft. These rooms are often referred to as loft or attic rooms, but in government documents they are usually referred to as a ‘room-in-roof.’ Some homes were designed this way, and some have had a later conversion. In this article we’ll go through the options for loft room insulation, and some of the main considerations for sloping ceilings. 

First, let’s explore how the regulations have evolved. 

Table of Contents

Loft room insulation regulations and requirements

Before the Building Regulations were introduced in 1965 these loft rooms were likely to have been built without insulation.Even after 1965, the amount of loft insulation required by the Building Regulations was very minimal.

Between 1966 and 1972 all that was required was 28mm of insulation and between 1973 and 1985 it was 70mm.

It was only in 2002 that his was increased to 200mm and it was not until 2013 that the amount required was increased to 270mm.

Of course, many homes built prior to 2002 without a loft room have benefited from top up loft insulation.

Loft room insulation is easy to do and a very cost-effective way to reduce energy bills. Plus, there have been numerous Government schemes over the years that have covered the cost of loft insulation, particularly for low-income households.

Retrofitting loft insulation

What is not so easy (and more costly) is retrofitting insulation to loft rooms in homes built prior to 2002 or loft conversions completed before that date.

Loft insulation for sloping ceilings

This also to applies to rooms on lower floors where a part of the ceiling is sloping.

Access to lay insulation between the sloping ceiling and the roof is a major issue. Yet without insulation these rooms are likely to get too cold in winter and too hot in summer to be comfortable to live in (it should not be forgotten that insulation helps both to keep heat in and out).

The problem with uninsulated loft rooms

Get one or more people sleeping in an uninsulated loft room and you are highly likely to have issues with both condensation and mould.

The same applies to a bathroom with an uninsulated sloping ceiling due to the amount of warm, moist air generated by baths and showers.

Insulating residual loft space

So, what is the answer? Some parts of a loft room are easier to insulate than others. Easy (if you have an access hatch) is to insulate the floor of the residual loft space and the stud walls themselves.

The residual loft space can be insulated in any of the materials usually used for a loft – mineral wool, cellulose, and sheep’s wool.

Stud walls and loft room insulation boards

Stud walls can be insulated using PIR insulation board cut so it fits between the batons, with a further layer of insulation over this ensuring no gaps are left.

Or insulation board can be fixed to the batons with a soft insulation material like mineral wool filling the space behind.

What are loft insulation boards?

Loft insulation boards are rigid panels designed to reduce heat loss by providing a thermal barrier in loft spaces.

They are made from materials like expanded polystyrene (EPS), polyurethane (PUR), or phenolic foam, these boards offer high insulation performance while being lightweight and easy to handle.

Unlike traditional insulation rolls, insulation boards are particularly effective in areas where space is limited, as they can be cut to fit between rafters or laid directly over existing joists.

By preventing heat from escaping through the roof, loft room insulation boards help improve energy efficiency, lower heating costs, and maintain a more consistent indoor temperature.

How to fit loft insulation boards

Fitting loft insulation boards is a relatively straightforward process that can be done as a DIY project or by a professional.

  • Measure the space between the roof joists to ensure the boards fit snugly.
  • Cut the insulation boards to the required size using a handsaw or utility knife.
  • Place the boards between or over the joists
  • Ensure they are tightly fitted to avoid any gaps where heat could escape.

(It should be noted that this should not be packed too tight. Compressed insulation loses its insulating properties).

If necessary, you can layer the boards for extra insulation. Once the insulation boards are in place, secure them with fixings or battens to prevent movement. Finally, seal any joints between boards with insulation tape to ensure maximum thermal efficiency.

How to fit loft insulation boards to a sloping ceiling

Most of the steps will be the same, but there are some challenges which will require more precision.

  • When installing the boards, place them tightly against the roof structure, working from the bottom up toward the ridge.
  • Secure the boards using appropriate fixings, such as insulation clips or battens.
  • You may also need to create a ventilation gap to avoid condensation.

Once you tape the joints you’ll improve the thermal efficiency of the entire sloping ceiling area.

Can I Use Foil for Loft Room Insulation and How?

Foil insulation can be effectively used in a loft room to improve thermal performance by reflecting heat back into the space.

Foil insulation, often referred to as reflective or radiant barrier insulation, works by reducing heat transfer through radiation, which can be particularly beneficial in lofts where heat tends to escape through the roof.

Aluminium foil for insulation

It is usually made from aluminum foil laminated onto other insulation materials, such as foam boards or bubble wrap.

How to fit foil insulation in lofts and roofs

To use foil for loft insulation, you can either staple it to the underside of the roof rafters or lay it over existing insulation materials.

For sloping ceilings, you should cut the foil to fit between the rafters and leave a small gap between the foil and the roof to allow air circulation, which prevents condensation.

For horizontal loft spaces, foil insulation can be placed over the joists or existing insulation, adding an additional layer of reflective protection.

Ensure that all seams are taped to maximise heat retention.

Insulation materials installed in a loft room to improve energy efficiency and regulate temperature.

Sloping ceiling insulation disadvantages

The trickiest part to insulate is a sloping ceiling.

  • Access is one issue.
  • The need to retain a 50mm gap between the insulation and the roof (to allow for ventilation and to avoid a build-up of moisture) is another.
  • This makes putting any kind of sprayed insulation into this space inadvisable (due to the risk of filling all the available space and leaving no gap).
  • It is also questionable whether the space is deep enough to install the depth of insulation required.

Sloping ceiling insulation can be tricky and it’s best to consult a professional for advice. 

Best option to insulate a sloping ceiling

Better methods are to insulate sloping ceilings when the roof is being replaced (the best option), fixing batons to the existing ceiling (and insulating between and over them) and removing the existing plasterboard to insulate.

Fixing insulation to an existing ceiling should only be contemplated if it is sound and the position of the rafters can be established (to ensure the additional weight of the insulation does not cause the ceiling to fall down).

If the existing ceiling is lath and plaster, it is better to have this safely removed before adding insulation. The loss of ceiling height (about 10cm) also makes the removal of the existing ceiling an attractive option if the ceiling height is already low.

Ventilation strategy for insulating loft rooms

A ventilation strategy before any work is done is especially important – not just for comfort but to avoid a build up of excess moisture under the roof and in the residual loft space resulting in rotting timbers.

Ventilation through the eaves should not be blocked by insulation or stored items. On the other side, gaps in the insulation need to be avoided, to avoid cold spots and thermal bridging.

Building Regulations approval is also needed for significant changes to thermal elements, including roofs. Significant means 50% of more of the surface area, a figure easily reached in loft rooms with sloping ceilings.

Insulating loft rooms: technical challenges and conclusion

With the technical challenges of retrofitting insulation to sloping ceilings (access, old ceiling removal, fixing, avoiding gaps, the need to manage ventilation properly and the need to ensure compliance with the Building Regulations, this job is best done by a professional installer.

Luckily, funding for this type of work is available to many on low incomes through the government’s Great British Insulation Scheme. 

The Ofgem website allows potential applicants find out in a few simple steps whether they are eligible. To access funding for room-in-roof insulation it is necessary to go through an energy supplier (it does not have to be your own) who will appoint an installer for you.

A list of contacts can be found here.  If you are not eligible for funding through the Great British Insulation Scheme we recommend that you look for an installer that is TrustMark registered. Again, you are looking for a tradesperson who installs room-in-roof insulation.

If, in the meantime, you are struggling with issues of condensation and mould in your attic rooms or anywhere else in your home, please do contact one of our friendly team on the Better Housing Better Health helpline 0800 107 0044 and we will do our best to help.

Recommended for you

New: Find out more about NEF's Impact

Discover the difference we're making in National Energy Foundation's latest Impact Report. See how we're creating positive change in energy efficiency and sustainability.

National Energy Foundation
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.